For the Mitsubishi Outlander and all other vehicles, a regular oil change is essential to ensure a healthy engine that will last for as long as possible. Unfortunately, some people neglect this crucial maintenance service which can result in irreparable damage to their car’s engine.
This is why it is essential to ensure that regular oil changes are performed on your Mitsubishi Outlander. Not only will this help to keep the vehicle running smoothly and efficiently, but it will also help to extend its life span.
No matter how superior it is, the quality of oil in a vehicle’s engine depreciates after some months or after covering some distance. Continuous usage of the oil after it is no longer ideal for a vehicle engine can lead to serious engine damage that will eventually cost you more.
Fresno Mitsubishi is an oil change service and vehicle maintenance center that can help you keep your Mitsubishi Outlander in the best possible condition always. You can easily schedule a Mitsubishi Outlander oil change service appointment at our website. Fresno Mitsubishi Dealership and Service Center offer both sales and regular maintenance of Mitsubishi Outlander model years such as:
Mitsubishi recommends the 5W-20 engine oil for all 2010 Mitsubishi Outlander trims. Both the XLS and GT trims have an oil capacity of 4.2 US quarts (4.0 liters) while the ES and SE have a capacity of 4.5 US quarts (4.3 liters).
You can embark on an oil change for all 2011 Mitsubishi Outlander models once every three months or after approximately 4000 miles (whichever comes first and depending on the oil type. More on this below) as well as every 6 months or after 7,500 miles. But you may want to refer to each model’s owner’s manual for any model-specific instructions. 2011 models have a capacity for 4.5 US quarts and can work well with 5W-20 synthetic blends or higher.
The 2012 models come with an oil capacity of 4.5 US quarts and work best with 5W-20 synthetic blend and higher-grade oil. The V6 engine variant also has a 4.5 US quarts capacity but should be used preferably with 0W-20 grades.
A 2.4L 2013 Mitsubishi Outlander engine has a capacity of 4.5 quarts and is most compatible with 0W-20 oil grades.
Each 2014 trim with a 2.4L four-cylinder engine has a capacity of 4.9/5 Quarts and requires 0W-20 grades.
2015 Mitsubishi Outlander trims with automatic transmission have an oil capacity of 4.5 quarts. However, trims with a manual transmission have a slightly low capacity of 4.2 quarts. Mitsubishi recommends fully synthetic 0W-20 oil and conventional grades such as 5W-20, and 5W-30 as alternatives.
A fully synthetic 0W-20 engine oil is recommended for both engine models of the 2016 Mitsubishi Outlander. These engines can take 4.5 quarts of engine oil. However, 5W-20 oil grade can temporarily be used but endeavor to revert to 0W-20 in your upcoming oil change.
The 2.4L four-cylinder and 3.0L V6 engine varieties of the 2017 Mitsubishi Outlander have a capacity for 4.9 quarts of oil, with a dry filter. Both engines work best with 0W-20 grades.
0W-20 full synthetic is the best oil type for both the 2.4L cylinder and the 3.0L V6 2018 Mitsubishi Outlander engines. The former engine type has a capacity for 4.9 quarts while the latter can take 4.5 quarts. Both use a fresh oil filter.
Like the 2018 models, both the 2.4 L and 3.0 L engines of the 2019 Mitsubishi Outlander work best with 0W-20 full synthetic oil. They also have an oil capacity of 4.9 and 4.5 quarts respectively.
The recommended oil grade for 2020 Mitsubishi Outlander Models with a 2.4 L four-cylinder engine is SAE 0W-20 (or 5W-20 on a temporary basis). The engine has a 4.9 quarts capacity (with filter).
0W-20 full synthetic is the most suitable oil grade for a 2.4L 4 -cylinder 2021 Mitsubishi Outlander Sport Model, mainly because of its fuel economy and cold weather capabilities. You can temporarily use 5W-20 if 0W-20 is not available. But be sure to stick with 0W-20 during your next oil change. The engine has a capacity of 4.9 quarts (with filter).
The best oil type for the 2022 Mitsubishi Outlander 2.5L 4 -cylinder engine (PR25DD) is 0W-20 (for all temperatures). The engine’s capacity is 5.4 quarts (with filter). No V6 models were unveiled in 2022.
Mitsubishi advises that users select engine oil with the proper SAE viscosity number according to the atmospheric temperature. The best Oil type for all 2.5 L four-cylinder engine 2023 Mitsubishi outlander models is SAE OW-20. These trims have a capacity of 6.76 US quarts for dry fill and 5.39 US quarts for service fill.
Just like some other products, several oil brands compete for an increased share of the engine oil market. These branded oil products come in varying designs, quantities, and weights. Because of the large number of oil makers in the market, it may sometimes be an overwhelming task to precisely identify the best oil to use for your Mitsubishi Outlander, especially if you don’t know much about motor oils.
If you are a newbie, it is essential to have someone experienced in the various oil types to help you select the most suitable and affordable oil for you. This is important because the kind of oil you use can have a significant impact on the overall performance of your Mitsubishi Outlander engine.
Below are the four main types of motor oils out there.
Conventional oil is the most common oil type in terms of usage. Its popularity is probably because it is the most budget-friendly of all the four types of oil. It is made of refined crude oil that is further processed with additives for improved viscosity and engine protection.
Conventional oil is most suitable for older vehicle models and light-duty automobiles with simple engine designs and low mileage. It is also recommended for cars that do not face severe conditions such as extreme cold or heat, dusty or dirty roads, and off-road terrains.
The shelf life of conventional oil can be as many as five years. Users of this type of oil can expect a fairly decent performance provided they use the desired quantity and weight during an oil change. However, conventional oil is the least efficient of all the main oil types when it comes to engine protection. It comes with materials that occur naturally, meaning that it is not as refined as the others.
Full-Synthetic oil (or synthetic oil) is the best quality oil for all categories of vehicles, especially today’s modern automobiles. It is synthesized from a base of highly refined conventional oil mixed with powder additives and another material that helps circulate the additives across the engine.
Unlike conventional oil, synthetic oil is a lot more refined and specially produced to ensure maximum engine protection and performance. It also has a longer shelf life as well as a longer oil change interval. All these come at an extra cost though because you’ll have to pay more for a synthetic oil product of the same quantity and weight as conventional oil.
But it will be money well spent because not only will you get more fuel efficiency and low-temperature performance but also fewer engine problems, implying lower maintenance costs over time.
Synthetic blend oil is a hybrid oil that results from a combination or blends of synthetic and conventional oils. In terms of protection and performance, synthetic blend oil is an upgrade on conventional oil, especially in severe conditions such as those mentioned earlier.
Though it does well protectively, synthetic blend oil still ranks below full-synthetic oil, especially in fuel efficiency, fuel economy, and overall performance. It is also less pricey than full synthetic oil but pricier than conventional oil. Synthetic blend oil has a longer shelf life than conventional oil but does not last as long as full-synthetic oil. It is ideal for drivers looking for a not-so-expensive and decent-quality alternative to full-synthetic oil.
Those who often cover 75,000 miles and more are the primary targets of high-mileage oil. This type of oil is designed with a unique mixture of additives that help lower oil consumption, and protect engine seals to ensure minimal oil evaporation and leaks in addition to limiting the amount of smoke and emissions from the engine due to oil burn.
If you own a Mitsubishi Outlander, it is vital to be conversant with certain engine oil terminologies (some of which have been mentioned earlier) such as:
SAE: Acronym for The Society of Automotive Engineers. The SAE is responsible for developing and regulating industry standards.
Viscosity: Oil thickness or resistance to flow. Viscosity changes according to changes in temperature. Oil becomes thick under cool temperatures and thins when subjected to heat.
5W-40: A formula that denotes a motor oil’s temperature and viscosity ratings. 5 signifies a five degrees Fahrenheit oil rating while 40 rates how resistant the oil is to thinning. The higher the number, the greater the resistance. The most common Mitsubishi Outlander oil types include 0W-20 Synthetic, 5W-20, and 5W-30 grades.
API donut: The label on the engine of a vehicle that provides information on the kind of oil required by that vehicle. Always ensure that you adhere to the API requirements for optimum engine performance and durability.
A vehicle owner’s manual often includes information on how often you should indulge in oil changes as well as the quantity and weight of oil to use for every oil change session. But if this information is not available on the manual or if the manual is not available, it is your duty as the vehicle owner to determine how often you need an oil change.
While indulging in an oil change very often will not damage or degrade your engine, it can cost you more in addition to wasting your time. But it is a more preferable option than taking too long to go for an oil change because of the likelihood of significant and costlier damage to your engine. This means that it is better to change your oil more frequently and avoid the relatively higher cost and greater inconvenience of having to repair your entire engine. You can talk to your mechanic to find a suitable oil change interval.
The frequency of oil changes can also depend on the type of oil you use for your Mitsubishi Outlander SUV. For instance, if it is conventional oil, you should go for an oil change at least every four months or after logging 4,000 miles (whichever comes first). Users of synthetic oil should go for an oil change not more than every six months or after 7,500 miles. It is recommended that you stick to a particular type and brand of oil as much as possible for engine stability.
In summary, going for an oil change very frequently portends no danger for your Mitsubishi Outlander. Moreover, oil change sessions are a great opportunity for your mechanic to identify and fix other problems. A typical session should not last more than 30 minutes.
Your Mitsubishi Outlander needs an immediate oil change if you perceive oil inside your SUV or observe more fumes of smoke than usual from the exhaust, if you are a frequent off-roader, if you frequently haul heavy loads, and if you often ply dusty roads.
These are just a few instances. Below are other situations you should consider going for an Outlander oil change.
A vehicle dashboard comes with several early warning systems that should help you stay out of trouble if you abide by them. The oil pressure or replacement warning light will flash repeatedly if your engine oil supply is insufficient and needs to be changed or increased.
All vehicles require routine maintenance to keep them sound and ensure they are not bogged down with different problems. Many people often schedule to go for vehicle maintenance or service but later postpone or even cancel it because of one reason or the other.
This can be dangerous for the overall performance of your car. It is important to follow the oil change instructions stipulated in the owner’s manual of your Mitsubishi Outlander if you want your engine to be a high performer. Delaying or canceling oil changes or holistic vehicle maintenance can be bad for your car.
Vehicle engine oil depletes with time, including through leaks. It is not always a good idea to depend on the oil warning indicator since it can malfunction without your knowledge. So you should form the habit of using the dipstick to check the gauge level of the oil before starting your car in the morning as frequently as possible, if not every morning. If you observe that the oil level is low, then either you add extra oil or go for an oil change.
Engine oil color tends to become darker and less viscous if it stays long in the engine without being changed. Viscosity can be confirmed by touching the oil to see if it feels thin. The darker and less viscous the oil gets, the quicker it should be changed to avoid any engine complications that may be more costly than an oil change.
Engine oil is an essential lubricant that makes for the smooth and efficient operation of a vehicle’s engine. As the oil ages and becomes darker and thinner, a knocking cranky sound may develop if you insist on driving with the old oil. This can be disastrous if the engine eventually knocks since you’ll have to spend a lot more (including expenses on an oil change) before it comes back to life.
If you often cover long distances, especially at low speeds, then you’ll need an oil change more frequently. Like noted earlier, if the distance you cover with your Mitsubishi Outlander is more than 75,000 miles, then you should settle for a high-mileage oil.
If you live around Fresno California, then the best service center for your Mitsubishi Outlander 2010-2023 models and other Mitsubishi automobiles is Fresno Mitsubishi. We at Fresno Mitsubishi are dedicated to offering our customers the highest quality services possible.
This is why Fresno Mitsubishi is not about car sales alone but also includes an extensive service center where you can bring your vehicle whenever you need all types of repair services (big or small) such as:
• Oil changes
• Tire rotations
• Brake pad repair and replacement
• Transmission repair and replacement
Fresno Mitsubishi also has a tire store where you can find premium tires either by vehicle or by size. We can swap your old tires out for the new tires so you get back on the road in no time.
And if you ever need any spare parts for your Mitsubishi vehicles, you can trust our dedicated parts department to provide you with quality products. We stock genuine OEM parts and quality accessories for your DIY project. All you have to do is shop for the parts on our website, and we’ll call you immediately after we receive your order.
Fresno Mitsubishi serves all local areas, including Fresno, Clovis, Selma, and Madera. We’re just a short drive away, plus we’re in a convenient and easy-to-find location. In most cases, all you’ll have to do is get on the CA-99, drive for a few minutes, and you’re here! We’re ready to fix your Mitsubishi Outlander 2010-2023 models and any car that comes our way.
Visit Fresno Mitsubishi Today! You can also call us 24/7 at (559) 256-0700 if you have any questions or other inquiries. Fresno Mitsubishi is located at 5505 N Blackstone Avenue, Fresno, California, USA.
You don't have any saved vehicles!
Look for this link on your favorites:
Once you've saved some vehicles, you can view them here at any time.
(559) 494-4491
Call Now5505 N Blackstone Ave • Fresno, CA 93710
Get DirectionsOpen Today! Sales: 8:30am-8pm
Open Today! Service: 7:30am-5pm
Open Today! Parts: 7:30am-5pm
